Orion 12 Subwoofer - Car Subwoofers


How many watts are in an NT 12 Orion Subwoofer?

Jun 15, 2009 by Babygirl | Posted in Car Audio

I have two Orion 12" NT Carbon fiber dual voice coil subwoofers. They are NT not NT2 with the red and yellow logo on them.
I can't find the watts on it. Does anyone know roughly how many watts? Are they good subs?

absolutely zero watts, the amp provides the power to the subwoofer, you have as many watts as your amp puts out at the given impedence. basically when you see a speaker and its says "300 wattsmax power!" thats to get people who dont know any better, than basically means 150Watts rms power handling. all the numbers of watts you see on the speakers specs is power handling.

648372627 | Jun 15, 2009

1,000,000,000,000

they hit hard as hell too
Ripcord_4523 | Jun 15, 2009

I got 2 12' Orion 124 subwoofer's. What size amp should I get?

Oct 07, 2009 by The Big Mexican | Posted in Car Audio

I was thinking about getting 2 amps that can put out 2250 max watts at 4 ohms for each subwoofer.



Orion HCCA Competition Subwoofers

Get yours!: www.sonicelectronix.com Orion HCCA subwoofers are some of the loudest subs out there! In this review we discuss the main features of ...

Shaking Doors w/ Deep Bass - 3 12" Orion HP Subwoofers Flexing Window ...

First vids of the HP's in action. They are getting louder every day! Shaking dorrs and houses lol.... www.youtube.com I'm not saying I&#39 ...

Orion HP vs Kicker CVR -ENGINE OFF- Young Jeezy Put On Bass Trick ...

Upgrading from the Kicker CVR 12's, with the Pioneer DEH-3000ib, to the Orion HP 12's, with the DEH-p6000ub... www.youtube.com My engine ...

Is your home alarm always crying wolf?

03.02.10

About every expert in in Sandy Springs has an alarm. We fill from 600 to 1,200 alarms each month with an correctness rate of about 3%. The other 97% or so can be chalked up to “subscriber literal,” meaning you forgot the dismay was on, or other household goof ups. Each alarm as likely as not takes 30 to 40 minutes of policing time away.

Add it all up and it comes out to about — not things.

I have an alarm at my house and I can’t tell you how the dang attitude works. I’ve never had one before, and it’s only been six years in this house, so I still have outmoded to figure that and how to program the new multi-functioning remote that costs almost as much as the television. The new far-removed can turn on the TV, CD, DVD, PS3, stereo, surround whole, the lights, the fireplace and, when the conditions are barely right, my neighbor’s TV, too.

Nothing says fun like an grown-up beverage, sitting on the deck with Detective Sandy and watching my neighbor try to build out why the TV automatically reverts to the Soap Opera Flute. Good times.

Source: Atlanta Journal Constitution (blog)

Subwoofer enclosures made out of MDF Board? | bomo

by admin

Rebutter: Oh, I see what event. Tu Vas meditative look at the submarine which is recommended to close the book. This one is neutral Thiele many parameters / modest steps in the handling of a large compound for a sub. I went to pl1290bl in winisd. A sealed box is about 2 cubic feet per sub will draw well.

This is not the leg-pull: http://cgi.ebay.com/ebaymotors/DUAL-Unaccompanied Cup ... I do not like being familiar with the case of everybody Household Depot is, but Depot near my Haunt you can get a flat sheet of 3 / 4 "plywood cons of red oak for $ 40.MDF should be considerably cheaper. Perhaps in range $ 20 - $ 30. Damn, I can remember when I could get a section of 7 / 8 "MDF $ 17 at Poorhouse Depot.

You should get a £ 1 box of 2-1/2 "screws and nails, a tube of liquid while you're there. Who would be another $ 8 - $ 10. Deliver infallible you your pre-spin holes when Dry-Fit you your parts. Email me if you have any questions.

Source: Subwoofer enclosures made out of MDF Board? | bomo